powerskills-engineering

Plugin powerskills-engineering from marketplace powerskills in Power-Agent/PowerSkills. Commands read from the repo's manifest — 19 days ago.

Skills (10)

• contingency-mitigation

  Senior power-engineer playbook for contingency violations. Use whenever N-1 or N-2 studies reveal voltage or thermal problems, binding contingencies, or post-outage islanding — including escalations from a tool skill's contingency run. Triggers on "N-1 violation", "worst contingency", "preventive vs

• convergence-failure-mitigation

  Senior power-engineer playbook for power-flow convergence failures. Use whenever a base case or post-change case diverges, oscillates, or fails to solve in PSS/E, PSLF, PowerWorld, pandapower, PyPSA, surge, or OpenDSS. Triggers on "power flow diverged", "case won't solve", "did not converge", "blown

• der-hosting-capacity-mitigation

  Senior power-engineer playbook for distribution DER integration limits. Use whenever rooftop or utility-scale PV, storage, or other DERs push a feeder into voltage rise, reverse power flow, thermal limits, or protection desensitization — or when the question is how much more DER a feeder can host. T

• dynamic-stability-mitigation

  Senior power-engineer playbook for dynamic stability problems. Use whenever eigenvalue or time-domain studies show poor damping, transient angle instability, weak voltage recovery, or sustained oscillations in tools such as ANDES or PSS/E — including escalations from a tool skill's dynamic run. Trig

• frequency-response-mitigation

  Senior power-engineer playbook for frequency-performance problems. Use whenever studies or operations show low system inertia, poor frequency nadir, high RoCoF, weak primary frequency response, UFLS encroachment, or reserve shortfall after loss of the largest unit or HVDC import. Triggers on "freque

• interconnection-impact-mitigation

  Senior power-engineer playbook for screening and mitigating the grid impact of a new generator, storage, or large-load interconnection. Use whenever the question is whether X MW can connect at a point of interconnection and what upgrades it needs. Triggers on "interconnection study", "system impact

• operations-planning-mitigation

  Senior power-engineer playbook for planning and operations optimization problems. Use whenever Egret or PyPSA studies are infeasible, reserve-deficient, congested, too expensive, or heavily curtailed — including escalations from a tool skill's OPF, unit-commitment, or expansion run. Triggers on "OPF

• short-circuit-mitigation

  Senior power-engineer playbook for excessive fault current and breaker over-duty. Use whenever a short-circuit study shows fault duty above interrupting ratings, or a new interconnection raises fault levels near equipment limits. Triggers on "fault duty", "breaker over-duty", "short-circuit current

• thermal-overload-mitigation

  Senior power-engineer playbook for overloaded lines and transformers. Use whenever power-flow or contingency studies show loading above ratings — including escalations from a tool skill where branch loading exceeds 100% of its rating. Triggers on "line overloaded", "transformer above rating", "relie

• voltage-violation-mitigation

  Senior power-engineer playbook for voltage violations. Use whenever a base-case or contingency study shows low voltage, high voltage, weak reactive support, or tap exhaustion — including escalations from a tool skill where bus voltage falls below 0.95 pu or rises above 1.05 pu in PowerWorld, PSS/E,

Similar plugins