esp32-workbench

Plugin esp32-workbench from marketplace esp32-workbench in agodianel/esp32-claude-workbench. Commands read from the repo's manifest — 10 days ago.

Skills (11)

• esp32-arch-review

  Reviews ESP32 firmware architecture for FreeRTOS safety, memory and stack sizing, ISR rules, error handling, peripheral and pin safety, networking, storage, logging and build configuration, and returns a PASS / PASS WITH NOTES / FAIL report. Use when the user asks to "review the architecture", "code

• esp32-build-fix

  Diagnoses and fixes ESP-IDF build, link, CMake/Kconfig, component-manager and flashing failures, using the build log to classify the error before changing anything. Use when "idf.py build fails", "undefined reference to", "No such file or directory" for a header, "Failed to resolve component", "CMak

• esp32-crash-review

  Decodes and analyses ESP32-family panics — Guru Meditation errors, register dumps, backtraces, aborts, stack overflows and watchdog timeouts on both Xtensa (ESP32, S2, S3) and RISC-V (C2, C3, C5, C6, H2, P4) chips — to find the root cause and recommend a fix plus diagnostic config. Use when the user

• esp32-feature-contract

  Creates a mission file and an implementation contract (scope, affected files, risks, tests, rollback) that must be accepted before any ESP32 firmware code is changed. Use when the user asks to "add a feature", "implement", "fix a bug", "refactor", "write a contract", "start a mission", "plan this ch

• esp32-log-triage

  Parses and classifies ESP32 serial monitor output — reset reasons, boot loops, panics, watchdog messages, brownouts, heap failures, Wi-Fi/BLE/MQTT errors and peripheral timeouts — and produces a triage report with a root-cause hypothesis and next steps. Use when the user pastes "idf.py monitor" outp

• esp32-peripheral-bringup

  Guides bring-up and debugging of ESP32 peripherals — I2C, SPI, UART, ADC and LEDC/PWM — using the ESP-IDF v5 driver APIs, chip-correct pin choices, and a step-by-step wiring → config → probe → speed-up procedure. Use when the user says "I2C sensor not responding", "i2c ESP_ERR_TIMEOUT", "no ACK", "I

• esp32-pin-audit

  Audits GPIO assignments in ESP32-family firmware against the verified pin facts of the actual target chip and board, flagging flash/PSRAM pins, strapping pins, input-only pins, USB-Serial-JTAG and UART0 console pins, JTAG pins, ADC2/Wi-Fi conflicts, double assignments and pin-map drift. Use when the

• esp32-pr-prepare

  Prepares a reviewable pull request for an ESP32 firmware change with summary, affected files, target chip, test evidence, static-check output, risk assessment, rollback plan and links to the mission and implementation contract. Use when the user says "prepare the PR", "write the PR description", "op

• esp32-release-check

  Runs a production-readiness review of ESP32 firmware — sdkconfig hardening, partition table and app-size headroom, OTA and rollback, secure boot, flash and NVS encryption, debug interfaces, logging and versioning — and returns a GO / NO-GO report with evidence. Use when the user asks "is this ready

• esp32-repo-scout

  Scans an ESP-IDF or PlatformIO firmware repository and produces a scout report of target chip, components, dependencies, pin usage, FreeRTOS tasks and risks before any change is planned. Use when the user says "scout the repo", "explain this firmware project", "what does this ESP32 project do", "map

• esp32-test-plan

  Generates a layered test plan for an ESP32 firmware change — static checks, host-side pytest/C logic, ESP-IDF Unity tests on target, pytest-embedded integration — with positive, negative, boundary, concurrency and error cases and explicit pass/fail evidence. Use when the user asks for a "test plan",

MCP servers (1)

• esp32-workbench

  runs: python3 ${CLAUDE_PLUGIN_ROOT}/bin/esp32wb-mcp

Hooks (1)

• PostToolUse

  python3 "${CLAUDE_PLUGIN_ROOT}/hooks/pin_guard.py"

Similar plugins