atmega328p-nano
claudeClaude Code skill for the Arduino Nano (A000005) — ATmega328P (AVR 8-bit).
21 skills
28
claude
esp32-wroom-38pin
Claude Code skill for the 38-pin ESP32 devkit (DevKitC V4 / NodeMCU-32S) — ESP32-D0WDQ6 (Xtensa LX6).
/
Plugin esp32-wroom-38pin from marketplace mcu-skills in alexex1993/mcu-skills. Commands read from the repo's manifest — 12 days ago.
What it installs
Skills (21)
atmega328p-nanoFirmware development for the Arduino Nano (A000005, ATmega328P @ 16 MHz, 5 V) — its 30 KB usable flash, 2 KB SRAM, 1 KB EEPROM, 8-channel 10-bit ADC, six 8-bit PWM pins across three timers, UART shared with the USB-serial chip, I2C on A4/A5, SPI on D10–D13, sleep modes, and the Arduino AVR core + Pl
atmega32u4-beetleFirmware development for the Beetle — the CJMCU / DFRobot \"Mini Arduino Leonardo\" USB board (ATmega32U4 @ 16 MHz, 5 V, 21×28 mm, castellated pads) — its native USB (CDC serial + HID keyboard/mouse/joystick), Caterina bootloader and 1200 bps touch upload, ten exposed I/O pads, four PWM pins across
lgt8f328p-minievbFirmware development for the LGT8F328P-LQFP32 MiniEVB — the Nano-style 30-pin \"purple nano\" board whose silkscreen reads LGTBF32BP (also sold as BTE21-15A, WAVGAT, LGT8F328P Nano V3.0), built on the Logic Green / Prodesign LGT8F328P, an AVR-instruction-compatible LGT8XM part with a 32 MHz internal
beu1000-evubaРазработка прошивок для BE-U1000 (Baikal Electronics / Байкал Электроникс, три ядра RISC-V: BR-350 и BM-310) на отладочных платах EVU-BA-2.1, EVU-BA-2.0 и EVU-BA-1.2 — её eFlash и QSPI flash, UART0/BootROM CLI, PWMA (захват и импульсы), АЦП с DMA, CAN FD, SPI, WDT, CLIC, а также SDK Байкала и его си
esp32-wroom-30pinFirmware development for the 30-pin ESP32-WROOM-32 development board — the DOIT ESP32 DevKit V1 / ESP32 CH340 Type-C / NodeMCU-ESP32 30-pin form factor, 15 pins per side, CH340G or CP2102 USB-UART bridge, AMS1117 LDO, user LED on GPIO2. Use when working on a 30-pin ESP32 devkit (ESP32-D0WDQ6 / ESP32
esp32-wroom-36pinFirmware development for the 36-pin ESP32-WROOM-32 development board — the original DOIT ESP32 DevKit V1 with 18 pins per side, i.e. the 30-pin layout plus the six in-package flash pins (SD0 SD1 SD2 SD3 CMD CLK = GPIO6-11) broken out at the USB end, CH340G or CP2102 bridge, AMS1117 LDO, user LED on
esp32-wroom-38pinFirmware development for the 38-pin ESP32-WROOM-32 development board — Espressif ESP32-DevKitC V4, Ai-Thinker NodeMCU-32S, DOIT ESP32 DevKit V1 38-pin and their CH340/CP2102 clones, 19 pins per side, with GPIO0 and the six in-package flash pins (GPIO6-11, labelled D0 D1 D2 D3 CMD CLK or SD0-SD3) bro
esp32c3-oled042Firmware development for the ESP32-C3 0.42\" OLED board (ESP32-C3FH4, QFN32) — the ABRobot / 01Space \"ESP32-C3-0.42LCD\" mini board and its clones, sold as \"ESP32-C3 SuperMini with OLED\" and \"ESP32 C3 OLED development board\". Covers its 72x40 SSD1306 OLED on I2C, the single I2C bus, blue LED on
esp32c6-lcd147Firmware development for the Waveshare ESP32-C6-LCD-1.47 board (ESP32-C6FH4, QFN32) — its 1.47\" 172x320 ST7789 LCD, WS2812 RGB LED, microSD/TF slot, USB-Serial-JTAG console, Wi-Fi 6/BLE/802.15.4 radio, and the ESP-IDF + PlatformIO setup around them. Use when working on this board or the ESP32-C6-LC
esp32c6-touch-lcd147Firmware development for the Waveshare ESP32-C6-Touch-LCD-1.47 board (ESP32-C6FH8, QFN32, 8 MB flash, SKU 31203 / 31201-M) — its 1.47\" 172x320 JD9853 IPS panel, AXS5106L capacitive touch controller on I2C 0x63, QMI8658A IMU on I2C 0x6B, microSD/TF slot on the shared SPI2 bus, ETA6098 battery charge
esp32p4-jc-m3-devFirmware development for the Guition JC-ESP32P4-M3-DEV board (JC-ESP32P4-M3 module — ESP32-P4NRW32 with 32 MB in-package PSRAM, 16 MB flash, and an ESP32-C6 radio co-processor on SDIO) — its MIPI-DSI panel and MIPI-CSI camera connectors, IP101 Ethernet, ES8311 codec with speaker amplifier and microp
esp32p4-jc4880p443Firmware development for the Guition JC4880P443C_I_W (JC4880P443, JC4880P443C, often mistyped JC4880P433) — a 4.3\" 480x800 IPS touch display board on the JC-ESP32P4-M3 module (ESP32-P4NRW32, 32 MB PSRAM, 16 MB flash, ESP32-C6 Wi-Fi co-processor on SDIO) — its ST7701S MIPI-DSI panel, GT911 touch, ba
esp32s3-cam-40pinFirmware development for the 40-pin ESP32-S3-WROOM-1 camera board — the Freenove ESP32-S3-WROOM (FNK0085) and the AliExpress \"ESP32-S3 CAM\" / \"ESP32-S3-WROOM N16R8 CAM\" clones that copy its header: 20 pins a side, a 24-pin DVP camera FPC connector for an OV2640/OV3660, an on-board microSD slot o
esp32s3-rlcd42Firmware development for the Waveshare ESP32-S3-RLCD-4.2 (SKU 33298 / 33507, and the -EN variant) — an ESP32-S3-WROOM-1-N16R8 AIoT board built around a 4.2\" fully reflective 300x400 monochrome LCD on a Sitronix ST7305/ST7306, with no backlight, plus an ES8311 speaker codec, an ES7210 dual-microphon
esp8266-nodemcu-30pinFirmware development for the 30-pin NodeMCU ESP8266 devkit — NodeMCU DevKit V1.0 / Amica (CP2102) and LoLin NodeMCU V3 (CH340G), built on the Ai-Thinker ESP-12E or ESP-12F module (ESP8266EX, 4 MB flash), with PlatformIO and the Arduino ESP8266 core (`board = nodemcuv2`). Use when working on a NodeMC
nrf52840-promicroFirmware development for the ProMicro nRF52840 (V1940) — the nice!nano v2 compatible clone also sold as SuperMini nRF52840, nRF52840 Pro Micro or nRFMicro (nRF52840 QIAA, Cortex-M4F @ 64 MHz, 1 MB flash / 256 KB RAM, BLE 5 + 802.15.4, native USB, Adafruit UF2 bootloader with SoftDevice S140). Covers
rp2040-picoFirmware development for the Raspberry Pi Pico (original, RP2040 — dual Cortex-M0+ @ 133 MHz, 264 KB SRAM, 2 MB QSPI flash) — its 26 exposed GPIO, 4-channel 12-bit ADC, 16-channel PWM, 2× UART/I2C/SPI, PIO state machines, USB 1.1 CDC, VSYS/VBUS/SMPS power wiring, and the PlatformIO + arduino-pico (e
rp2350a-weactFirmware development for the WeAct Studio RP2350A Core Board (RP2350A — dual Cortex-M33 @ 150 MHz, 520 KB SRAM, 4 MB or 16 MB QSPI flash) in both of its revisions, RP2350A_V10 and RP2350A_V20 — the 40-pin Pico-2-shaped header, 3-or-4-channel 12-bit ADC, PWM, PIO, USB-C CDC, the V1.0 LDO vs V2.0 buck
stm32f401rc-blackpillFirmware development for the 40-pin \"Black Pill\"-format board with an STM32F401RCT6 (STM32F401RC, LQFP64, 256 KB flash, 64 KB RAM, 84 MHz) that ships with the WeAct Studio HID Bootloader (USB 0483:572A, flash 0x08000000-0x08003FFF, app at 0x08004000) — its PC13 LED, KEY button on PA0, 25 MHz HSE,
stm32f411-blackpillFirmware development for the WeAct Studio \"Black Pill\" (STM32F411CEU6) and its clones such as the DFRobot DFR0864 — the 25 MHz HSE and 32.768 kHz LSE crystals, PC13 LED, K1 button, USB-C wired straight to USB_OTG_FS, ROM DFU flashing, the SPI-flash footprint, and the STM32Cube HAL + PlatformIO set
stm32h750-weactFirmware development for the WeAct Studio MiniSTM32H7xx core board (STM32H750VBT6) — its 0.96\" ST7735 TFT, DVP camera, QSPI/SPI flash, MicroSD, USB, and the STM32Cube HAL + PlatformIO setup around them. Use when working on this board or any STM32H750/H743 WeAct core board: project setup, platformio
More from alexex1993/mcu-skills
All 21 plugins →atmega32u4-beetle
claudeClaude Code skill for the Beetle / CJMCU Mini Arduino Leonardo — ATmega32U4 (AVR 8-bit, native USB).
21 skills
28
beu1000-evuba
claudeClaude Code skill for the Baikal Electronics EVU-BA-2.1 — BE-U1000 (3× RISC-V).
21 skills
28
esp32c3-oled042
claudeClaude Code skill for the ESP32-C3 0.42" OLED board (ABRobot / 01Space) — ESP32-C3FH4 (RISC-V).
21 skills
28
esp32c6-lcd147
claudeClaude Code skill for the Waveshare ESP32-C6-LCD-1.47 — ESP32-C6FH4 (RISC-V).
21 skills
28
esp32c6-touch-lcd147
claudeClaude Code skill for the Waveshare ESP32-C6-Touch-LCD-1.47 — ESP32-C6FH8 (RISC-V).
21 skills
28
Similar plugins
ruflo-agentdb
claudeAgentDB memory controllers with HNSW vector search, RuVector embeddings, and causal graphs
2 skills · 2 commands · 1 agent
ruvnet/ruflo 81,589
cwc-makers
claudeOnboard a Code-with-Claude Makers Cardputer with one /maker-setup command — clones the build-with-claude repo, flashes UIFlow firmware, and installs the Claude Buddy app bundle.
2 skills · 1 command
anthropics/claude-plugins-official 47,076
reverse-engineering
claudecodexBinary reverse engineering, malware analysis, firmware security, and software protection research for authorized security research, CTF competitions, and defensive security
4 skills · 3 agents
wshobson/agents 42,461
Pixeltable
claudecodexBuild multimodal AI applications with Pixeltable -- tables, computed columns, embedding search, UDFs, tool-calling agents, and 25+ AI provider integrations.
1 skill · 2 commands · 2 agents · hooks
anthropics/knowledge-work-plugins 35,601
coding-agent-rollout
claudeRoll Claude Code out to a team with guardrails you can check. Four deterministic stdlib scripts: a settings linter that reads shared, local, user and managed settings together (array merge, deny-ask-allow order) and blocks blanket shell allows, pre-approved destructive commands and committed credentials; an MCP and plugin inventory that blocks anything missing from your approved list or holding a literal secret, and flags unpinned or plain-http servers; a CLAUDE.md layering audit that resolves every layer and @import and flags broken imports, contradictions, secrets and resident size; and a privacy-safe adoption tracker that turns local session files into counts only and classifies the rollout as PILOT, SPREADING, EMBEDDED or STALLED. Ships cs-claude-code-rollout agent, /cs-claude-rollout and /cs-claude-settings-lint commands, 3 references, a baseline managed-settings policy and a four-phase rollout plan.
1 skill · 2 commands · 1 agent
alirezarezvani/claude-skills 29,725
voltagent-domains
claudeDomain-specific technology experts - blockchain, fintech, gaming, IoT, payments, X/Twitter APIs
VoltAgent/awesome-claude-code-subagents 26,513
Maintain esp32-wroom-38pin?
This page updates itself from your repo. Add the badge to your README, or get it Featured to pin it above the organic results with a followed link to your site.
claude & codex plugins21 plugins