jgs-se-knowledge-packs

Plugin jgs-se-knowledge-packs from marketplace jgs-se-knowledge-packs in jgsystemsconsulting/jgs-se-knowledge-packs. Commands read from the repo's manifest — 8 days ago.

Skills (83)

• automotive-signpost

  Signpost (not a knowledge pack) for the automotive standards landscape: ISO 26262, ASPICE, SAE J3016, UNECE R155, UNECE R156, and the NHTSA vehicle set. Contains NO source content: designation, edition, owner, status, and an official catalogue URL only. Use when you need to identify or locate an aut

• avionics-signpost

  Signpost (not a knowledge pack) for the avionics development assurance standards landscape: RTCA DO-178C / EUROCAE ED-12C and its supplements (DO-330/ED-215, DO-331/ED-218, DO-332/ED-217, DO-333/ED-216); RTCA DO-254 / EUROCAE ED-80; SAE ARP4754B and ARP4761A; and the free regulator documents that re

• cisa-cpg

  Knowledge base from CISA Cross-Sector Cybersecurity Performance Goals 2.0. Use for prioritized IT/OT baseline cyber goals aligned to NIST CSF 2.0 (including GOVERN), critical-infrastructure hygiene, MSP/supply-chain expectations, and board-friendly outcome language. Covers CPG 2.0 goals only; does n

• dafman-63-119

  Knowledge base from DAFMAN 63-119 (15 April 2021), Mission-Oriented Test Readiness Certification. Use for continuous MOTRC replacing single-point OTRR thinking: framework/applicability, Certification Official vs PM roles, review cycle and exit criteria, certification memo/decertify gates, DT&E/contr

• dau-se-guidebook

  Knowledge base from the DoD Systems Engineering Guidebook (September 2026, DOPSR Case # 26-T-2032). Use for the DoD SE process model (16 processes: 8 technical management + 8 technical, mapped by method to ISO/IEC/IEEE 15288), SE Modernization (digital engineering, MBSE, MOSA, Agile), engineering re

• digital-systems-engineering

  Knowledge pack from 'Towards Digital Engineering: The Advent of Digital Systems Engineering' (Huang et al., Old Dominion University, arXiv:2002.11672, 2020). Use when reasoning about digital engineering, the DoD Digital Engineering Strategy and its five goals, the Authoritative Source of Truth, digi

• dod-digital-engineering

  Knowledge base from the DoD Digital Engineering Strategy (2018, OUSD/ODASD(SE)). Use for the Department of Defense's five digital engineering goals — (1) formalize the development, integration, and use of models; (2) provide an enduring authoritative source of truth; (3) incorporate technological in

• dod-mosa

  Knowledge base from the OUSD(R&E) guidebook Implementing a MOSA in DoD Programs (Feb 2025). Use for the Modular Open Systems Approach as a DoD acquisition + design discipline: the statutory/regulatory basis (10 U.S.C. 4401–4403, FY2017/FY2021 NDAA, DFARS), the five OUSD(R&E) pillars, the plan→modula

• dod-mq-bok

  Knowledge base from the DoD M&Q BoK (the Manufacturing and Quality Engineering Body of Knowledge), v3.0 of July 2025, published by OUSD(R&E). Use for the manufacturing-and-quality view of the defense acquisition life cycle: what M&Q engineers do across the Adaptive Acquisition Framework phases (Pre-

• dod-rio

  Knowledge base from the DoD Risk, Issue, and Opportunity (RIO) Management Guide for Defense Acquisition Programs (OUSD R&E, Sep 2023 incl. Change 2.2). Use for the defense-acquisition mechanics of program risk management: the RIO definitions (risk/issue/opportunity), the five-step risk process (plan

• dod-te-guidebook

  Knowledge base from the DoD Test & Evaluation Enterprise Guidebook (OUSD R&E, August 2022). Use for DoD test and evaluation (T&E) across the Adaptive Acquisition Framework — the four test communities (contractor testing, developmental DT&E, operational OT&E, live-fire LFT&E); the five operational ev

• dod-vva-rpg

  Knowledge base from the DoD M&S VV&A Recommended Practices Guide (RPG web edition). Use for verification, validation, and accreditation of models and simulations — role responsibilities (user, developer, M&S PM, V&V agent, accreditation agent), fidelity, validation fundamentals, data V&V, risk-infor

• dodaf

  Knowledge base from DoD Architecture Framework (DoDAF) 2.02 — Volume II: Architectural Data and Models. Use for DoDAF viewpoints, DM2 meta-model, capability modeling, operational architecture, systems architecture, services architecture, data/information modeling, standards compliance, project/portf

• doe-o-413-3

  Knowledge base from the DOE Order on Program and Project Management for the Acquisition of Capital Assets (DOE O 413.3 series). Use for Critical Decisions CD-0–CD-4, performance baselines, acquisition strategy and IPTs, cost/schedule/EVMS/PARS controls, risk-informed governance, reviews, and contrac

• doe-sem

  Knowledge base from DOE Systems Engineering Methodology (SEM) Version 3 — the DOE SDLC for IT investments. Use for staged systems lifecycle planning through maintenance, Stage Exits, Structured Walkthroughs, In-Stage Assessments, requirements traceability, and CMM-aligned process discipline. Covers

• dote-te-guidebook

  Knowledge base from the DoD Test & Evaluation Enterprise Guidebook (August 2022 edition 8.02) with DOT&E-facing enterprise emphasis. Use for T&E enterprise roles (DOT&E vs USD(R&E)), DT&E/OT&E/LFT&E, cybersecurity T&E, MOSA/automation/digital enablers, suitability/reliability growth, and TEMP/Strate

• easa-rules

  Reconstructed reference notes on EASA acceptable means of compliance for airborne software and airborne electronic hardware, built from AMC 20-115D (ED Decision 2017/020/R, AMC-20 Amendment 14, consolidated in Amendment 23) and AMC 20-152A (ED Decision 2020/010/R, AMC-20 Amendment 19, consolidated i

• eu-ai-act

  Knowledge base from EU Artificial Intelligence Act — Regulation (EU) 2024/1689. Use for AI system classification (high-risk vs prohibited vs general), conformity assessment procedures, GPAI model obligations, transparency and disclosure requirements, governance structure (AI Office / AI Board), pena

• faa-8110-49

  Reconstructed reference notes on US FAA approval guidance for airborne software and airborne electronic hardware, built from four public-domain sources (FAA Order 8110.49A, AC 20-115D, AC 20-152A, AC 00-69; documents dated 2017-07-21 to 2022-10-07, pinned 2026-10-12). Use for how FAA certification s

• faa-ams-vv

  Knowledge pack synthesized from FAA AMS Lifecycle Verification and Validation Guidelines, Version 4.0 (January 2023): verify-vs-validate, the three tiers, decision-point-gated V&V across the AMS lifecycle, and shift-left. SCOPE LIMITS: single-source (the January 2023 guidelines); FAA acquisition V&V

• faa-hf-std

  Knowledge base from the FAA Human Factors Design Standard (HF-STD-001B, 2016) — the FAA's consolidated human-factors / human-systems-integration design criteria for systems it manages, operates, or maintains. Use for requirement-level design rules on: general human-factors design principles; automat

• faa-req-handbook

  Knowledge base from the FAA Requirements Engineering Management Handbook (DOT/FAA/AR-08/32). Use for writing requirements for real-time, embedded control systems — the avionics/medical slant — via the Handbook's eleven recommended practices: system overview and boundary (monitored/controlled variabl

• faa-rma

  Knowledge base from FAA-HDBK-006D (2020), the FAA's System Reliability, Maintainability, and Availability (RMA) Handbook for National Airspace System (NAS) hardware and software. Use for RMA figures of merit (MTBF, MTBO, MTTR, the availability variants), the bathtub curve and probability distributio

• faa-sem

  Knowledge base from the FAA Systems Engineering Manual (SEM) v1.0.1. Use for civil-agency systems engineering as the FAA practices it inside the Acquisition Management System (AMS) and the National Airspace System (NAS): the five-phase AMS lifecycle and its decision points; operational concept devel

• faa-std-025

  Knowledge base from FAA-STD-025f (Preparation of Interface Documentation). Use for IRD/ICD family definitions, common format and content, IRD shall-requirements, ICD design characteristics, verification/VRTM, and CM/revision/approval of FAA Enterprise Subsystem interfaces. Covers rev F preparation r

• faa-system-safety

  Knowledge base from the FAA System Safety Handbook (Dec 30, 2000). Use for system safety as a specialty within systems engineering: the five-step safety risk management process (mandated by FAA Order 8040.4 and the AMS), the severity-by-likelihood risk matrix and acceptance bands, the Safety Order o

• fda-med-device

  Reconstructed reference notes on US FDA medical-device software regulation, built from seven public-domain FDA sources (the QMSR final rule 89 FR 7496, FDA device software guidance documents, and the eSTAR program page; pinned 2026-10-12). Use for regulatory pathways and premarket submissions (510(k

• federal-bca

  Knowledge base from OMB Circular A-94 (revised 2023-11-09) on guidelines and discount rates for benefit-cost and cost-effectiveness analysis of federal programs. Use for BCA principles, benefit/cost measurement, discount-rate policy, uncertainty/sensitivity, distributional incidence, and decision re

• fhwa-its-se

  Knowledge pack synthesized from Systems Engineering for ITS, fourth generation (December 2022, Federal Highway Administration, US Government work, 17 U.S.C. § 105): ITS project systems engineering for transportation agencies. SCOPE LIMITS: single-source (December 2022 FHWA PDF); not construction spe

• functional-safety-signpost

  Signpost (not a knowledge pack) for the functional safety standards landscape: IEC 61508, ISO 26262, ISO/SAE 21434, UL 4600, SAE J3016, and ASPICE. Contains NO source content: designation, edition, owner, status, and an official catalogue URL only. Use when you need to identify or locate a functiona

• gao-agile

  Knowledge base from the GAO Agile Assessment Guide (GAO-24-105506, 2023). Use for assessing and managing Agile software development in federal programs: the Agile Manifesto and framework family (Scrum, Kanban, XP, SAFe, DA, DSDM, Lean, DevOps); the three adoption perspectives (team dynamics, program

• gao-cost

  Knowledge base from the GAO Cost Estimating and Assessment Guide (GAO-20-195G). Use for program cost estimating: the four characteristics of a reliable estimate (comprehensive, well documented, accurate, credible) and the 18 best practices; the 12-step cost estimating process (purpose, plan, technic

• gao-schedule

  Knowledge base from the GAO Schedule Assessment Guide (GAO-16-89G, 2015). Use for building, assessing, or auditing a program's integrated master schedule (IMS): the ten best practices of a reliable schedule (capture, sequence, resource, duration, traceability, valid critical path, reasonable total f

• gao-tra

  Knowledge base from the GAO Technology Readiness Assessment Guide (GAO-20-48G, 2020). Use for evaluating technology maturity in acquisition programs and projects: Technology Readiness Levels (TRL 1–9) and related scales (MRL, IRL), identifying Critical Technology Elements (CTEs), the five-step proce

• is-gps-200n

  Knowledge base from IS-GPS-200 Rev N (NAVSTAR GPS Space Segment / Navigation User Segment Interfaces). Use as a worked ICD/IS exemplar: what an interface specification is, DIST-A and IRN/CCB change control, interface definition vs identification, composite-signal criteria patterns, NAV data as paylo

• jsp-376

  Knowledge pack synthesized from JSP 376 Defence Acquisition Safety Policy V1.1 (April 2024, Ministry of Defence, Open Government Licence v3.0): acquisition safety requirements, safety artefacts, and their application across the standard acquisition lifecycle. Covers the policy frame and legislative

• jsp-815

  Knowledge pack reconstructed from JSP 815 Defence Safety Management System V1.3 (Ministry of Defence, Open Government Licence v3.0): the SMS Framework, all 12 Elements with their Expectations and Performance Statement themes, and Annexes A to F plus H. Covers the Defence Safety Function and which JS

• jsp-912

  Knowledge pack synthesized from JSP 912 Human Factors Integration in Defence Systems, Part 1 Directive and Part 2 Guidance, V3.0 (March 2024, Ministry of Defence, Open Government Licence v3.0): Human Factors Integration in Defence acquisition. SCOPE LIMITS: both parts in one pack; MOD policy, not st

• jsp-936

  Knowledge pack synthesized from JSP 936 Dependable Artificial Intelligence (AI) in Defence, Part 1: Directive, V1.1 (November 2024, Ministry of Defence, Open Government Licence v3.0): dependable-AI direction for Defence. SCOPE LIMITS: single-source (JSP 936 Part 1 V1.1); MOD policy, not statute; not

• maritime-signpost

  Signpost (not a knowledge pack) for maritime safety and class rules: SOLAS Consolidated Edition 2024 (IH110E) as the paywalled statutory core, ISM Code & Guidelines 2018 (ID117E), ISPS Code 2003 (K116E) and the 2021 guide (IB116E), and COLREGS 2026 (IC904E), with designation, edition, owner, status,

• med-device-eu

  Reconstructed reference notes on EU and UK medical-device software, built from six sources captured 2026-10-13: MDCG 2019-11 rev.1 (June 2025), MDCG 2020-6 (April 2020), MDCG 2020-13 (July 2020), MDCG 2020-7 (April 2020), MDCG 2020-8 (April 2020), and the MHRA software-applications guidance (2023-07

• mil-hdbk-338

  Knowledge base from MIL-HDBK-338B (Electronic Reliability Design Handbook). Use for electronic reliability engineering: R/M/A theory, reliability specification/allocation/prediction, parts management and derating, reliable circuit and fault-tolerant design, environmental and human performance reliab

• mil-hdbk-516

  Knowledge base from MIL-HDBK-516D, 29 May 2026, Airworthiness Certification Criteria. Use for design AW criteria and MoCs across systems engineering, structures, flight technology, propulsion, air vehicle subsystems, crew systems and aerial refueling, avionics electrical and E3, computer systems and

• mil-hdbk-61

  Knowledge base from MIL-HDBK-61B, the DoD Configuration Management (CM) guidance handbook (7 April 2020, cataloged with Change 1, 2025). Use for defense CM across the acquisition and sustainment life cycle: the five CM functions (planning, identification, control/change management, status accounting

• mil-std-40051

  Knowledge base from MIL-STD-40051E w/Change 1, 30 July 2025, Preparation of Digital Technical Information for Technical Manuals. One volume covers page-based and electronic manuals (IETM and ETM). Use for scope, applicable-document classes, general and detailed requirements, content-selection method

• mil-std-881f

  Knowledge base from MIL-STD-881F (13 May 2022), DoD Standard Practice for Work Breakdown Structures for Defense Materiel Items. Use for Program/Contract/Subcontract WBS construction, 100% rule and dictionary discipline, commodity appendices A–J, Common Elements (K), sustainment CES reporting (L), Go

• mil-std-882

  Knowledge base from MIL-STD-882E (DoD System Safety). Use for the system safety process, hazard analysis tasks (PHA/SSHA/SHA/O&SHA), the risk assessment matrix (severity x probability), software safety criticality, and risk acceptance. US-gov public domain.

• mrl-deskbook

  Knowledge base from the Manufacturing Readiness Level (MRL) Deskbook (Version 2025, 1 May 2025, OSD ManTech / Joint Service/Industry MRL Working Group). Use for manufacturing maturity and producibility risk in defense acquisition: ten-level MRL scale (target, not grade); demonstration environments;

• nasa-ceh

  Knowledge base from the NASA Cost Estimating Handbook (CEH) v4.0. Use for NASA's 12-step, three-part cost estimating process (Project Definition, Cost Methodology, Cost Estimate); the WBS, CADRe, and ONCE data backbone; estimating methodologies (analogy, parametric/CER, engineering build-up, EVM, De

• nasa-de-acquisition

  Knowledge base for NASA-HDBK-1004A, approved 2026-10-26 (NASA Digital Engineering Acquisition Framework Handbook). Use when planning or reviewing acquisition of digital engineering data and models: Data Requirements Description (DRD) instrument and template library, Recommended Contract Language (RC

• nasa-fault-management

  Knowledge base from the NASA Fault Management Handbook (NASA-HDBK-1002, Draft 2, April 2012). Use for the systems-engineering discipline of designing what a system does when it fails — the fault/failure/anomaly vocabulary, the five FM strategies (two prevention strategies — design-time fault avoidan

• nasa-hsi

  Knowledge base from NASA Human Systems Integration (HSI) Practitioner's Guide (NASA/SP-2015-3709). Use for HSI process implementation, lifecycle phase activities, function allocation, ConOps development, HSI Plan writing, HSI metrics (MOE/MOP/TPM/KPP), HITL testing strategy, HSI team organisation, s

• nasa-ms-7009

  Knowledge base from NASA-STD-7009B (Standard for Models and Simulations) with implementation depth from NASA-HDBK-7009B. Use for M&S criticality and programmatics, development evidence and capability assessment, verification/validation domains, uncertainty and sensitivity, use-phase results assessme

• nasa-npr-7123

  Knowledge base from NASA NPR 7123.1D — Systems Engineering Processes and Requirements. Use for the 17 common SE processes (SE Engine), life-cycle reviews and entrance/success criteria, SEMP structure and content, ETA roles and tailoring/customizing rules, Technology Readiness Levels (TRL 1–9), SE wo

• nasa-npr-7150

  Knowledge base from NASA NPR 7150.2D — NASA Software Engineering Requirements. Use for NASA's Agency-wide software-engineering requirements: the software classification scheme (Classes A–F), the Requirements Mapping Matrix and class-driven applicability, tailoring and Technical Authority governance,

• nasa-pra

  Knowledge base from the NASA Probabilistic Risk Assessment Procedures Guide (NASA/SP-2011-3421, 2nd ed.). Use for quantitative PRA of aerospace and safety-critical systems: the risk triplet and scenario logic stack (MLD, ESD, event trees, fault trees, minimal cut sets), Bayesian data collection and

• nasa-risk

  Knowledge pack synthesized from NASA Risk Management Handbook, Version 2.0 (November 2024; NASA/SP-20240014019 Part 1, NASA/SP-20240014326 Part 2): RIDM, CRM, and risk leadership. SCOPE LIMITS: single-source (the two November 2024 volumes); domain PRA methods (fault trees, event trees, Bayesian infe

• nasa-rm-standard

  Knowledge base from NASA-STD-8729.1A — NASA's R&M (Reliability and Maintainability) standard covering spaceflight and support systems (Revision A, 2017-06-13). Use for NASA's objectives-driven R&M framework — the R&M objectives hierarchy (one Top Objective decomposed into four sub-objectives, paired

• nasa-schedule

  Knowledge base from the NASA Schedule Management Handbook (2024 edition, Revision 2). Use for program/project schedule management of aerospace and large engineering efforts: the five sub-functions (Planning, Development, Assessment & Analysis, Maintenance & Control, Documentation & Communication); t

• nasa-se-expanded

  Knowledge base from the Expanded Guidance for NASA Systems Engineering (NASA/SP-2016-6105-SUPPL, Volume 1, March 2016) — the practitioner-depth supplement to the NASA SE Handbook. Use for the load-bearing mechanics the handbook compresses: the SE Engine's per-phase cadence and the iterative-vs-recur

• nasa-se-handbook

  Knowledge base from the NASA Systems Engineering Handbook (NASA/SP-2016-6105 Rev 2). Use for NASA's systems-engineering process model — the SE Engine and 17 common technical processes, the program/project life cycle (Pre-Phase A through F), Key Decision Points and technical reviews (MCR/SRR/PDR/CDR/

• nasa-std-8719-14

  Knowledge base from NASA-STD-8719.14C (Process for Limiting Orbital Debris). Use for orbital-debris assessment planning, mission-related debris limits, explosion/passivation and collision risk, postmission disposal options, reentry casualty risk, and ODAR/EOMP governance. Covers STD-8719.14C (Approv

• nasa-system-safety

  Knowledge base from NASA System Safety Handbook Volume 2 (NASA/SP-2014-612). Use for risk-informed safety cases (RISC), integrated safety analysis (ISA), adequate safety concepts, safety objectives and requirements, acquirer/provider roles, graded safety analysis, claims-evidence-argument structure,

• nasa-systems-modeling

  Knowledge base from the NASA Systems Modeling Handbook for Systems Engineering (NASA-HDBK-1009A Rev A, 2025). Use for model-based systems engineering (MBSE) wired into NASA's NPR 7123.1 SE processes: the three aspects of MBSE (language / methodology / framework), the NASA SE Engine and its two OOSEM

• nhtsa-vehicle

  Synthesized reference notes from three US Government vehicle-safety sources: NHTSA Cybersecurity Best Practices for the Safety of Modern Vehicles (updated 2022, final), NHTSA Automated Driving Systems 2.0: A Vision for Safety (2017), and a 16-section selection of 49 CFR Part 571 (FMVSS) pinned at eC

• nist-800-171

  Knowledge base from NIST SP 800-171 Rev. 3 (Protecting CUI in Nonfederal Systems). Use for CUI confidentiality requirements on contractors and other nonfederal organizations, the 17 requirement families, ODPs, SSPs, POA&Ms, and tailoring from SP 800-53. Covers 800-171r3 only; does not replace SP 800

• nist-800-37

  Knowledge base from NIST SP 800-37 Revision 2, the Risk Management Framework (RMF) for information systems and organizations. Use for the seven RMF steps (Prepare, Categorize, Select, Implement, Assess, Authorize, Monitor) and their tasks; the three-tier organization-wide risk model; authorization b

• nist-800-61

  Knowledge base from NIST SP 800-61 Rev. 3 (Incident Response Recommendations for Cybersecurity Risk Management). Use for CSF 2.0-aligned incident response life cycles, IR roles, Community Profile priorities for DE/RS/RC and preparation, playbooks, coordination, and continuous improvement. Covers 800

• nist-ai-rmf

  Knowledge base from NIST AI Risk Management Framework 1.0 (NIST AI 100-1). Use for AI risk management, trustworthiness characteristics, GOVERN/MAP/MEASURE/MANAGE functions, bias management, AI actor roles, TEVV, AI RMF profiles, and socio-technical risk framing. Does not cover sector-specific regula

• nist-cps

  Knowledge base from the NIST Framework for Cyber-Physical Systems (SP 1500-201/202/203, v1.0, 2017). Use for engineering and analyzing cyber-physical systems (CPS) and IoT: the CPS Framework's aspect × facet grid (nine aspects of concern examined through conceptualization, realization, and assurance

• nist-csf

  Knowledge base from NIST Cybersecurity Framework (CSF) 2.0. Use for cybersecurity risk management, GOVERN, IDENTIFY, PROTECT, DETECT, RESPOND, RECOVER, Organizational Profiles, CSF Tiers, supply chain risk, enterprise risk management, incident response. Covers the CSF 2.0 document only; does not cov

• nist-ssdf

  Knowledge base from NIST Secure Software Development Framework (SSDF) v1.1 (SP 800-218). Use for secure software development practices, SDLC security integration, software supply chain security, vulnerability disclosure, SBOM, threat modelling, secure coding, build hardening, EO 14028 compliance. Co

• nist-sse

  Knowledge base from NIST SP 800-160 Vol 1 (Engineering Trustworthy Secure Systems) and Vol 2 (Developing Cyber-Resilient Systems). Use for systems security engineering (SSE): the three SSE framework contexts (problem/solution/trustworthiness), the 30+ design principles for trustworthy secure design,

• nist-stat-handbook

  Knowledge base from the NIST/SEMATECH e-Handbook of Statistical Methods (NIST HB 151) — the practical statistics reference for engineering, metrology, and quality. Use for: exploratory data analysis and the four univariate assumptions (4-plot); measurement process characterization including bias/pre

• nrc-nuclear

  Reconstructed reference notes on US NRC software assurance guidance for digital computer software in nuclear power plant safety systems, built from seven public-domain sources (Regulatory Guide 1.168 Revision 2, July 2013; Regulatory Guides 1.169, 1.170, 1.171, 1.172, and 1.173 Revision 1, July 2013

• omg-signpost

  Signpost (not a knowledge pack) for OMG modelling specifications — UML, SysML, BPMN, UAF, SoaML, MOF, OCL, XMI, DDS. Contains NO source content: it only points to where the official specs live and what each is for. Use when you need an OMG modelling/architecture specification — the OMG licence forbi

• rail-signpost

  Signpost (not a knowledge pack) for the railway RAMS and signalling assurance standards: EN 50126-1:2017 and EN 50126-2:2017 (both with A1:2024) for the RAMS process, EN 50128:2011 (A1:2020, A2:2020) for software for railway control and protection systems, and EN 50129:2018 and EN 50129:2026 for saf

• requirements-writing

  Guidance on writing high-quality requirements: the requirement quality characteristics and the EARS (Easy Approach to Requirements Syntax) patterns — ubiquitous, event-driven, state-driven, optional-feature, unwanted-behaviour — for unambiguous, singular, verifiable requirements, plus defect/anti-pa

• sd-22-dmsms

  Knowledge base from the SD-22 DMSMS Guidebook (DSPO, SD-22, 06-JAN-2026 (cover dated December 2025)). Use for managing Diminishing Manufacturing Sources and Material Shortages (DMSMS) and obsolescence across a long-lived system's life cycle: the five-step process (Prepare, Identify, Assess, Analyze,

• se-standards-signpost

  Signpost (not a knowledge pack) for the systems-engineering standards landscape — ISO/IEC/IEEE 15288, 24748, 29148, 42010, 15026, 24765; INCOSE SE Handbook & Vision 2035; OMG SysML; SAE/EIA 1001/649/748; ECSS space standards; NATO AAP-48; CMMI; NIST SP 800-160; and more. Contains NO source content:

• se
• sebok
• space-signpost