wireless-communications

Plugin wireless-communications from marketplace matlab-agentic-toolkit in matlab/matlab-agentic-toolkit. Commands read from the repo's manifest — 3 days ago.

Skills (11)

• matlab-add-awgn

  Read BEFORE writing any code that adds Additive White Gaussian Noise (AWGN) to signals and converts between SNR, Eb/No, Es/No, and per-subcarrier SNR for communications simulations, using awgn(), convertSNR(), berawgn(). The default MATLAB patterns for AWGN (e.g., 'measured' option, manual SNR formu

• matlab-design-ofdm-system

  Read BEFORE writing any code that builds or simulates OFDM systems. The default MATLAB patterns for OFDM (e.g., direct ifft/fft, awgn with 0 dBW power, missing symOffset) produce subtly incorrect results — always use ofdmmod/ofdmdemod instead of direct IFFT/FFT. This skill specifies the correct call

• matlab-detect-capture-usrp

  Smart triggered RF capture on NI USRP radios with Wireless Testbench — record only when a signal of interest appears, not continuously (triggered spectrum sensing). Use energy detection to capture when signal power rises above the noise floor, or preamble detection to cross-correlate against a known

• matlab-generate-5g-waveform

  Generate 3GPP-compliant 5G NR downlink and uplink baseband waveforms. Use to create NR signals, test model (TM) waveforms, fixed reference channels (FRC), test and measurement (T&M) signals, or test vectors for conformance testing. Covers configuring data, control, and broadcast channels and signals

• matlab-generate-ble-waveform

  Generate Bluetooth Low Energy (BLE) PHY waveforms. Read BEFORE writing any BLE waveform code to avoid hallucinating API patterns. Covers bleWaveformGenerator, bleIdealReceiver, bleCTEIQSample, bleAngleEstimate, bluetoothTestWaveform for LE1M/LE2M/LE500K/LE125K. Bluetooth Toolbox R2022a+. author: Mat

• matlab-generate-gnss-waveform

  Generate GNSS baseband waveforms (GPS, Galileo, NavIC) with physically realistic or user-specified channel impairments using the Satellite Communications Toolbox. Use when generating GPS L1 C/A, L1C, L2C, L5, Galileo E1, E1C, E5a, E5b, E5, or NavIC L5, S, L1 signals. Covers gpsWaveformGenerator, gal

• matlab-generate-wlan-waveform

  Generate standard-compliant IEEE 802.11 waveforms using MATLAB WLAN Toolbox. Use when creating WLAN waveforms, PPDU packets, or the transmit side of a link-level simulation. Covers all formats: Non-HT (802.11a/g), HT (802.11n), VHT (802.11ac), HE-SU/HE-MU/HE-TB (802.11ax), EHT-MU/EHT-TB (802.11be),

• matlab-set-up-usrp-radio

  Set up and verify a connection to an NI USRP radio (USRP E320, N300, N310, N320, N321, X300, X310, or X410) using Wireless Testbench. Use when connecting a USRP for the first time, configuring radio hardware, troubleshooting connection failures, or verifying a radio setup. Covers host inspection (OS

• matlab-simulate-bluetooth-network

  Simulate Bluetooth system-level networks using the Bluetooth Toolbox. Use this skill for any Bluetooth topology: BLE ACL (Asynchronous Connection-Less) data connections, CIS (Connected Isochronous Stream) and LE Audio for stereo speakers or hearing aids, BLE GAP (Generic Access Profile) connection e

• matlab-simulate-wireless-network

  Set up and run wireless network simulations using the Wireless Network Toolbox. Use this skill when creating system-level simulations with wirelessNetworkSimulator, adding traffic sources (networkTrafficOnOff, networkTrafficFTP, networkTrafficVoIP, networkTrafficVideoConference), configuring node mo

• matlab-transmit-capture-usrp

  Transmit and capture RF waveforms using Wireless Testbench with NI USRP radios (X410, X310, N310, N320, N321, N300, X300, E320). Use when generating test signals, transmitting over the air, capturing IQ data, performing loopback tests, configuring multi-antenna setups, or troubleshooting dropped sam

Similar plugins