datasheet-spec-tableCompile part numbers, instruments or venues into a specification table where every value is quoted with the maker or source document and its date, unverified cells are marked instead of filled from memory, units and the conditions a figure holds under are kept, and price or availability is left as t
device-config-file-from-register-tableConvert a pasted register or tag table into the import file or device map a target format asks for, row by row - state the address base and conversion, register width and data type per row, check unique names and overlapping or non-contiguous ranges, keep an input and output row count, list every va
fabrication-vector-import-intent-checkCompare SVG or DXF physical geometry and approved cut, engrave and non-output roles with recipient import observations. Use when CAD layers collapse, vector sizes change or a browser preview is offered as fabrication proof. Not for machine commands, power settings or safety certification.
fault-diagnosis-evidence-logTake a vehicle, HVAC or similar equipment symptom and produce the five to eight questions that best separate the possible causes, in order of diagnostic value, plus a running evidence log of symptom, test, reading with units, result and what it rules out, keeping observed facts apart from guesses an
procedure-document-from-field-notesTurn field steps, inspection notes, a technician report or a migration plan into a work instruction, process flow or cutover plan that keeps every step and branch as stated, gives each step an owner and prerequisites, marks gaps as questions and lists what the performer and safety owner must verify.
standards-clause-locatorFind which clause of a supplied code, specification, standard or equipment manual governs a stated requirement or symptom, quote the clause number and wording verbatim with its edition, compare report values against clause values by number, unit and condition, and say plainly when no clause was foun
step-assembly-export-fidelity-checkCompare CAD assembly occurrences, placements and approved physical dimensions with receiving STEP observations. Use when exported geometry looks correct but scale, linked instances or required metadata differ. Not for constructing CAD, validating kinematics or certifying manufacture.