kicad-skills

Plugin kicad-skills in seanrobertwright/lril-kicad-skills. Commands read from the repo's manifest — 28 days ago.

Skills (9)

• kicad-export

  Produce manufacturing and documentation outputs from a KiCad 10 project: gerbers, drill files, pick-and-place/position files, BOM (JLCPCB/PCBWay/OSH Park/generic presets), STEP 3D, PDF plots, board renders, netlists, statistics and reusable kicad-cli jobsets. Use when the user wants to order boards,

• kicad-footprint

  Create KiCad 10 footprints (.kicad_mod) for packages missing from the stock library, from datasheet package drawings, using IPC-7351B land-pattern rules and KLC conventions. Use when a footprint is missing, the user says "make a footprint", "land pattern", "pad layout", gives package dimensions, or

• kicad-interview

  Requirements interview for a new electronics design ("grill me"). Use before drawing anything in KiCad whenever the user wants to design, build, or start a board, circuit, schematic, PCB, module, breakout, dev board, sensor node, power supply, or says "let's design", "I want to make", "help me build

• kicad-parts

  Resolve every component of a KiCad design to a concrete symbol, footprint, manufacturer part number and datasheet, and obtain symbols/footprints/3D models from manufacturer websites, LCSC/JLCPCB (easyeda2kicad), SnapEDA, Ultra Librarian, SamacSys, Digi-Key or Mouser when the stock library lacks them

• kicad-pcb

  Create and check KiCad 10 boards (.kicad_pcb): stackup, outline, mounting, footprint placement, routing, zones, DRC. Use when the user wants a PCB laid out, parts placed, traces routed, an autorouter run, DRC fixed, a board resized, layers changed, or a ground pour added. Builds the board from desig

• kicad-review

  Independent design review of a KiCad 10 schematic and PCB before fabrication. Use when the user asks to review, check, audit, sanity-check, or "look over" a schematic or board, before ordering boards, or after kicad-schematic/kicad-pcb finish. Runs ERC/DRC, exports the netlist and renders, then walk

• kicad-schematic

  Create, edit and verify KiCad 10 schematics (.kicad_sch) from a design spec. Use when the user wants a schematic drawn, wired, cleaned up, checked with ERC, or turned into a netlist, or asks to add/remove/rewire parts in an existing schematic. Generates the file from design/design.json with the kcs

• kicad-symbol

  Create KiCad 10 schematic symbols (.kicad_sym) for parts missing from the stock library, from a datasheet pin table or a manufacturer page. Use when a symbol is missing, the user says "make a symbol for", "I need the symbol for this chip", pastes a pinout, or a design spec references a part not in t

• kicad

  Core KiCad 10 skill and router. Use whenever the user mentions KiCad, schematics, PCBs, boards, footprints, symbols, gerbers, ERC/DRC, or wants to design electronics hardware, even if they do not say "KiCad". Provides the environment facts (kicad-cli, file-format versions, library paths), the `kcs`

Similar plugins