networking

Plugin networking from marketplace sfp in siddu1004/SFP. Commands read from the repo's manifest — 4 days ago.

Skills (10)

• cisco-ios-patterns

  Cisco IOS and IOS-XE review patterns for show commands, config hierarchy, wildcard masks, ACL placement, interface hygiene, and safe change-window verification. Use when reading, writing, or reviewing Cisco IOS / IOS-XE configuration or planning a change window.

• homelab-network-readiness

  Readiness checklist for homelab VLAN segmentation, local DNS filtering (Pi-hole, AdGuard Home), and WireGuard-style remote access. Use when planning or reviewing home network changes — splitting a flat network into trusted, IoT, guest, or management VLANs, moving DHCP to a local resolver, or adding

• homelab-network-setup

  Practical home and homelab network planning for gateways, switches, access points, IP ranges, DHCP reservations, DNS, cabling, and common beginner mistakes. Use when planning or fixing a home or homelab network — gateway, switch, AP, IP ranges, DHCP, DNS, or cabling.

• homelab-pihole-dns

  Pi-hole installation, blocklist management, DNS-over-HTTPS setup, DHCP integration, local DNS records, and troubleshooting broken DNS resolution on a home network. Use when the task explicitly involves Pi-hole — installing it, managing blocklists, configuring DoH or DHCP, adding local DNS records, o

• homelab-vlan-segmentation

  Segmenting home networks into VLANs for IoT, guest, trusted, and server traffic using UniFi, pfSense/OPNsense, and MikroTik — including switch trunk config, firewall rules, and wireless SSID mapping. Use when splitting a home network into IoT, guest, trusted, and server VLANs on UniFi, pfSense/OPNse

• homelab-wireguard-vpn

  WireGuard VPN server setup, peer configuration, key generation, split tunneling vs full tunnel routing, and remote access to a home network from mobile and laptop clients. Use when setting up WireGuard for remote access to a home network, or deciding between split and full tunnel routing.

• netmiko-ssh-automation

  Safe Python Netmiko patterns for read-only collection, bounded batch SSH, TextFSM parsing, guarded config changes, timeouts, and network automation error handling. Use when automating network device access with Python Netmiko, whether collecting state or pushing guarded config changes.

• network-bgp-diagnostics

  Diagnostics-only BGP troubleshooting patterns for neighbor state, route exchange, prefix policy, AS path inspection, and safe evidence collection. Use when a BGP neighbor is down, routes are missing, or prefix policy and AS path need inspection.

• network-config-validation

  Pre-deployment checks for router and switch configuration, including dangerous commands, duplicate addresses, subnet overlaps, stale references, management-plane risk, and IOS-style security hygiene. Use when reviewing a router or switch configuration before deployment.

• network-interface-health

  Diagnose interface errors, drops, CRCs, duplex mismatches, flapping, speed negotiation issues, and counter trends on routers, switches, and Linux hosts. Use when an interface shows errors, drops, CRCs, flapping, or a duplex or speed mismatch.

Similar plugins